Comelit FT CB 07 - Manual (Page 19)

FT CB 07
17 FT CB 07
ENGLISH
4) MANAGING THE DIRECTORY
A name can be stored in the directly by means of the infrared programmer ART. 1230,
software ART. 1249/A
4A) ENTERING A NAME BY MEANS OF ART. 1230
INITIAL CONDITION
Module supplied
in stand-by condition SCROLL NAME
SEARCH NAME
Press the NAME-> key
of Art. 1230
Enter the user name
you want to enter.
EXAMPLE:
ROSSI GIOVANNI To use the low case keys
press SHIFT.
To cancel the character to
the left press <.
To enter special
characters press
the combination of keys
as described below:
NAME -> + A = Å
NAME -> + B = Ä
NAME -> + C = ß
NAME -> + O = Ö
NAME -> + P = Ø
NAME -> + Q = Ü
Press ESC to cancel
the user name
entering operation
ON DISPLAY DESCRIPTION OPERATION
ENTER
A NAME
ROSSI GIOVANNI
* If the system is set with 6 digits it will be necessary to enter the number of the
block of flats before the user code EXAMPLE: 01 _ _ _ 1 (the block of flat num-
bers must have 2 digits as in the EXAMPLE).
Press the ENTER key of
Art. 1230
Enter the user code
EXAMPLE: 1 *
Press the key ENTER of
Art. 1230 to store user
name and code
It is possible to proceed to
enter other users
ON DISPLAY DESCRIPTION OPERATION
_ _ _ _
ENTER THE CODE
ENTER = CONFIRM
ESC = CANCEL
_ _ _ 1
ENTER THE CODE
STORING IN
MEMORING...