Comelit MT MDVR808B - Manual (Page 10)

Quick Reference Manual
8
y Search: Selecting allows you to select the search method from Event Log Search, Record Table
Search, Calendar Search, Motion Search and Text-In Search.
y Go To: Selecting allows you to search the first/last recorded image or search the image with specific
date and time.
y
Bookmark: Selecting adds the current playback point to the bookmark list.
y
Export: Selecting allows you to copy video clips and print a selected image.
y Camera Menu: Selecting allows you to control Zoom and Audio.
y Alarm: Selecting resets the DVR’s outputs including the internal buzzer during an alarm.
y Panic: Selecting starts panic recording of all cameras, and selecting again stops panic recording.
y Data Source: Selecting allows you to select the data source to be searched.
y Exit: Selecting exits the search mode and enters the live monitoring mode.
Remote Program
RASplus
RASplus (Remote Administration System Plus) program, which is designed to be used with remote digital
video recorders (DVRs, network video transmitters and network cameras included), is an integrated software
program that controls system management, video monitoring, video recording and image playback of multiple
remote sites.
Computer system requirements for using the RASplus program are:
y Operating System: Microsoft ®
Windows
®
XP x86 (32 Bit) (Service Pack 3), Microsoft
®
Windows
®
Vista
x86 (32 Bit) (Service Pack 1) or Microsoft ® Windows ® 7 x86 (32 Bit)
y CPU: Intel Pentium IV (Celeron) 2.4GHz or faster
y RAM: 512MB or higher
y VGA: AGP, Video RAM 8MB or higher (1024x768, 24bpp or higher)
After installing the RASplus software, you will find the RASplus shortcut icon on the desktop. Run the
RASplus program by double clicking the icon.