Comelit MT MDVR808B - Manual (Page 4)

Quick Reference Manual
2
y Camera Buttons: Pressing the individual camera buttons will cause the selected camera to display
full screen. Buttons 1 to 9 are also used to enter passwords.
y Play/Pause Button: In the live monitoring mode, pressing the button freezes the current screen. When
in the playback mode, pressing the button plays back images at regular speed or pauses playing video.
Pressing the button selects a highlighted item or completes an entry that you have made during system setup.
y Arrow Buttons: These buttons are used to navigate through menus and GUI. You can also use them
to change numbers by highlighting a number in the menu and using the Up and Down arrow buttons to
increase or decrease the number’s value. In the playback mode, pressing the
button plays video
backward at high speed and pressing the button again toggles the playback speed from , and .
Pressing the button plays video forward at high speed and pressing the button again toggles the playback
speed from , and . When in the pause mode, pressing the button moves to the next image
and pressing the button moves to the previous image.
y Menu/Cameo Button: In the Live Monitoring mode and Search mode, pressing the button displays
the menu icons at the top of the screen. Pressing and holding the button for three seconds or longer enters
the cameo mode.
y Playback Mode Button: Pressing the button enters the playback mode, and pressing the button again
exits the playback mode. When in one of the multi-view formats, pressing this button enters the Triplex
mode. The DVR supports the Triplex function: monitoring, recording and playing back at the same time.
y Zoom/PTZ Button: Pressing the button zooms in the current image in double on the screen. Pressing
and holding the button for three seconds or longer enters the PTZ (Pan/Tilt/Zoom) mode.
y Display/Spot Button: Pressing the button toggles between different display formats (PIP, 2x2, 1+5,
1+7, 3x3 and 4x4). Pressing and holding the button for three seconds or longer allows you to select which
cameras will display on the Spot monitor.
y Group/Sequence Button: When in the live mode, pressing the button changes the screen from the
current camera group to the next camera group. Pressing and holding the button for three seconds or
longer displays live channels sequentially.
y Clip Copy Button: Pressing the button allows you to copy video clips.
y Alarm Button: Pressing the button resets the DVR’s outputs including the internal buzzer during an
alarm, and displays the event log when you are in the live monitoring mode unless there is an active alarm.
y Panic Button: Pressing the button starts panic recoding of all camera channels, and pressing the button
again will stop panic recording.
y USB Port: The USB port is provided to connect external hard disk or flash drives for video clip copying
or system upgrades. A USB mouse or PostScript™ USB printer can be connected to the USB port.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds to initialize.
Setting Up the System
Press the
MENU button or move the mouse pointer to the top of the screen and then select (Setup) in the
Live Monitoring menu to enter the setup screen.