CounterPath Bria 4 Configuration Guide - Enterprise Deployments - Manual (Page 8)

CounterPath Corporation
4
• Workgroup
This setting is a bitmask with a default value that enables every feature.
Preferred Account for Calls
This information applies only if users have more than one SIP account.
The setting feature:accounts:defaultForCall is used by Bria to select the account to use for a phone call when
account selection mode is set to Auto Account.
• Bria tests the phone call against the dial plans. It runs through the dial plans in order, starting with the dial
plan for the first account, and it stops at the first match. See page 7 for information on dial plans.
• If testing against the dial plan does not result in a selection, the account specified in
feature:accounts:defaultForCall is used.
Typically, this setting is either left empty, in which case the first account is set as the preferred account.
Keep in mind that in any event the user can change the preferred account via the Account List.
2.4 Audio Quality
These settings provide controls for audio quality.
2.5 Call Security (Encryption)
About Signaling and Media Encryption
Bria can be configured to support signaling and media encryption (security) for phone calls.
• Signaling encryption is only possible using TLS as the transport; UDP and TCP do not support signaling
encryption.
• Media encryption, which is performed using SRTP, can only be supported if signaling encryption is in
place, in other words, if TLS is used for the transport.