CounterPath Bria 3.5.1 for Mac User Guide - Enterprise Deployments - Manual (Page 19)

Bria 3 for Mac User Guide – Enterprise Deployments
15
3.3 Handling Incoming Calls
Bria must be running to answer incoming calls. (If Bria is not running, incoming calls may be directed to
voicemail; check with your system administrator.)
The new call appears in its own call panel. In addition, the Call Alert box appears, even if Bria is minimized.
For information on call alerts, see page 60.
Auto Answer
You can set Bria to automatically answer all incoming calls.
Click. If you are on another call, that first
call is automatically put on hold. You are
now talking to the new caller. Or click. There will be a busy signal. The
call may be directed to voicemail (if you
have this service). Or click Forward; a call entry field
appears. Enter the name or number to
forward to and click Forward Now.
Click to answer a video call and
start sending your video
immediately Click to answer without video; if you
want (and if you have a camera), you
will be able to add video later.
This is the alert for a video call This is the alert for an audio-only call
Turn Auto Answer on or off
Auto answer is initially configured to auto-answer after one
ring, and to send only your audio when the call is
established. To change this configuration choose
Preferences > Calls.
Auto answer is automatically turned off when you shut
down.