CounterPath Bria Android Tablet Edition 1.0.3 User Guide - Manual (Page 28)

CounterPath Corporation
24
4.3 Advanced Settings
When you changed an advanced setting, you may be prompted to apply the changes. In order to apply the
changes, Bria will automatically unregister and reregister all enabled accounts. This may take a few seconds.
Field Description
Send DTMF using The method used for DTMF, sent when you press a number key when dealing with an
auto attendant (such as “press 1 for customer service”).
Enter the value specified by your VoIP service provider: RFC 2833, SIP Info, or Inband
DTMF.
If DTMF tones are not being recognized, trying the other method may resolve the issue.
If DTMF is still not working, contact your VoIP service provider for information about
DTMF and IVR.
Also Send Inband DTMF This applies when RFC2833 or SIP Info is selected as a DTMF method.
When On, inband DTMF is sent in addition to the other two methods (RFC 2833 or SIP
Info) chosen above.
Network Traversal Strategy Tap to display the choices; see page 25.
STUN Wi-Fi, STUN Mobile, ICE Wi-
Fi, ICE Mobile, DNS SRV, STUN
server See “Network Traversal Strategy”, below.
VAD • On: audio is not transmitted when no one is speaking. Turning this feature on may
reduce bandwidth usage.
• Off: audio is transmitted when no one is speaking.
QoS If desired, ask your VoIP service provider if QoS is supported. QoS (Quality of Service)
can allow your phone calls to be given a higher priority on the network.
Turning QoS on has no effect if your provider does not support it.
Noise Reduction When on, Bria attempts to reduce background noise. Typically on when you are not using
a headset, typically off when you are using a headset.
Echo Cancellation Try turning on this setting if you or the person you are talking to is hearing an echo. If the
other person still hears an echo, turn this setting back to Off.