Daisy PowerLine TargetPro 953 - Manual (Page 6)

UNLOAD PELLETS:
The bolt does not extract a pellet. You must shoot the pellet out if a safe target is available. If a
safe target is not available, put trigger safety “ON” (no red showing), open bolt, insert a cleaning
rod in the muzzle end and push the pellet out of the barrel. Invert the gun so that the pellet can fall
out of the feed track. Be careful not to damage the bolt tip by pushing the rod through too hard.
Do not reuse the pellet.
WARNING: Never assume gun is empty of projectiles. Always point the gun in a safe
direction.
AMMUNITION:
Use only .177 caliber (4.5mm) lead air gun pellets. Daisy No. 557 match pellets are excellent for
practice and competition. Competitors may choose AVANTI No. 357 Competition Diablo match
target pellets. These pellets are uniform in size with minimal weight variations. The flat wad-cutting
designed head will punch a clean hole to provide for easier and more accurate scoring. AVANTI
pellets are engineered to produce maximum accuracy.
REAR SIGHT ADJUSTMENT:
Your air gun is equipped with fiber optic sights and features an adjustable rear sight.
HOW TO ADJUST SIGHT RIGHT OR LEFT (WINDAGE): Loosen screw “A” by turning
counterclockwise (See Drawing No. 10). Move rear sight to the right side of the gun to make it
shoot to the right, or to the left side of the gun to make the gun shoot to the left. Make certain
screw “A” is retightened after adjustment.
HOW TO ADJUST SIGHT UP OR DOWN (ELEVATION): Raise the rear sight by turning screw “B”
clockwise to make the gun shoot higher. Lower the rear sight by turning screw “B”
counterclockwise to make the gun shoot lower (See Drawing No. 10).
SIGHT REPLACEMENT:
Shooters who want greater control over the sighting of their PowerLine® 953 will want to add
more sophisticated target-style sights. Call Daisy Outdoor Products Customer Service at
1-800-713-2479 to find out the type of sights available and ordering information.
6
HOW TO ADJUST SIGHT
LEFT OR RIGHT (WINDAGE)
HOW TO ADJUST SIGHT
UP OR DOWN (ELEVATION)
NO. 10
SCREW “A”
WINDAGE
ADJUSTMENT
WINDAGE SCREW “B”
ELEVATION
ADJUSTMENT