Daisy 105 Buck - Manual (Page 7)

6
HOW TO OPERATE
CAUTION:
Be sure gun is always pointed in a
safe direction.
Step 1. PUT "ON SAFE"
Step 2.
COCK
Step 3. FEED BB
Step 4.
AIM AT SAFE TARGET
Step 5. TAKE "OFF SAFE"
Step 6. FIRE
Step 1. PUT "ON" TRIGGER SAFETY
Push trigger safety from left to right so no red is showing.
It is a good practice to get in the habit of keeping the trigger
safety "ON" until ready to fire the gun (See Drawing No. 1a-1d).
LOAD BBs
Tilt gun to its right side, place thumb on arrow, push load-
ing door in and up (Drawing 2a). Cup hand under barrel and
slowly pour in new Daisy BBs (Drawing 2b). Do not complete-
ly fill reservoir as this could jam your gun. Close loading door.
Step 2. COCK
When cocking, raise muzzle with sight up. Firmly grasp
the cocking lever and pull outward until it is fully cocked
(seven clicks for the Red Ryder, 1998, Buck and model 10;
one click for the Timberwolf). (see drawing 3). At this point, a
BB could be loaded into the ready to fire position and your
gun must be handled with care. Close cocking lever and your
gun is ready to fire.
CAUTION:
Gun must always be pointed in a safe
direction. Keep a firm grip on the lever while cocking. The
lever could slip and slam shut, possibly causing injury. (See
“Pinch Points’ Drawing No. 3).
NO. 2a
NO. 2b
TO LOAD / CARGANDO / POUR CHARGER
PINCH
POINTS
NO. 3
TO COCK / AMARTILLANDO / POUR ARMER
PULL LEVER OUTWARD UNTIL
FULLY COCKED
105 BUCK, MODEL 10, 1998 &
1938 RED RYDER (7 CLICKS)
95 TIMBERWOLF (1 CLICK)
JALE LA PALANCA HACIA ARRIBA
HASTA QUE SUENE UN CLICK
TIREZ LE LEVIER VERS
L'EXTÉRIEUR JUSQU'À CE QU'UN
DÉCLIC SE FASSE ENTENDRE