Dascom DM-220 User Guide - Manual (Page 19)

Tally Dascom DM-210/220
7
1.6 Installing Ribbon Cartridge
1. DM-210: Open the top cover and then front cover.
DM-220: Open the top cover and then front cover; turn up the cut device.
DM-210 DM-220
2. Stretch the ribbon fabric by turning the ribbon knob - pay attention to the arrow on the ribbon cartridge.
3. Insert the ribbon between the print head and the platen, and press it in until it clicks into place.
4. Turn the knob again to stretch the ribbon fabric.
5. DM-210: Close the front cover and then top cover.
DM-220: Close the cut device; close the front cover and then top cover.
DM-210 DM-220