Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 55)

Chapter 2: Emulations
55
Escape Sequence Summary
The following escape sequences are supported:
Sequence Function Description
ESC D Index Forward Moves the paper forward one line with no change to the
horizontal position.
ESC H Set Tab Sets a tab stop at the current horizontal position.
ESC M Index Reverse Moves the paper backward one line with no change to
the horizontal position.
ESC P@ Align to Line
Boundary Moves the vertical position to the next line relative to top
of form as defined by the current LPI setting.
ESC PA Restore
Cursor
Position Moves the print position to the beginning of the saved
vertical position.
ESC PB Save Cursor
Position Saves the current vertical position.
ESC PC Save Powerup
Configuration Saves the current configuration into the Powerup
Configuration.
ESC Pb POSTNET
Mode Causes the following digits to be printed as POSTNET
bar codes.
ESC Pc
or ESC Pe UK Post Mode Causes the following digits to be printed as UK postal
bar codes. Special for Tally UK.
ESC Pd
KIX Mode Causes the following digits to be printed as Dutch KIX
postal bar codes. Special for Tally UK.
ESC Pf
PLANET
Mode Causes the following digits to be printed as PLANET
postal bar codes.
ESC , A
ESC ( xx Select G0
Character Set Selects the G0 character set.
ESC - A
ESC ) xx Select G1
Character Set Selects the G1 character set.
ESC [ n z Select LPI Selects lines per inch.
ESC [ n w Select CPI Selects characters per inch.
ESC [ n m Select
Attributes Selects bold, italics, overline, strikethrough, underline,
subscript and superscript attributes. Also DP, Draft,
Gothic, Courier, OCR-A and OCR-B font styles and
downloaded font.
ESC [ n t Select Form
Length Select form length. 2 to 255 lines, or 11 inches or 12
inches.
ESC [ n u Set Tabs Sets horizontal tab stops.
ESC [ n q Clear Tabs Clears horizontal tab stops.
ESC [ 3 g Clear All Tabs Clear all tab stops.
ESC [ 0 g Clear Current
Tab Clear a tab stop at the current horizontal position.
ESC [ n { Select Paper
Path Activates the selected paper input path.
ESC [ 6 ~ Reset Resets to Powerup Configuration.
ESC [ cn !p VFU Channel
Command Performs a VFU channel move.
ESC [ cn !v Relative Paper
Motion Performs a relative paper move.