Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 61)

Chapter 2: Emulations
61
HP 2564C Emulation
The HP 2564C emulation is defined by HP 256x Printer Family Technical Reference Manual, HP
Manual Part No. 02564-90905.
This emulation supports the following HP PCL Level 1, PCL Level 2, some PCL Level 3
commands (mainly in the area of font selection), and PCL extensions unique to line matrix
printers. These extensions provide for raster graphics, bar code printing, and VFUs.
Command Description Command Description
ESC E Reset ESC 9 Reset Margins
ESC *b<0-1056>W Raster Download ESC *b<0-1056>Y Move Raster Amount
of Lines
ESC *rA Raster Start
Sequence ESC *r1A Raster Start
Sequence
ESC *rB Raster Stop
Sequence ESC *r60L Set Horizontal 60 DPI
ESC *r70L Set Horizontal 70 DPI ESC *r120L Set Horizontal 120
DPI
ESC *r140L Set Horizontal 140
DPI ESC *r72V Set Vertical 72 DPI
ESC *r144V Set Vertical 144 CPI ESC &dD Enable Underline
ESC &d0D Enable Underline ESC &d@ Disable Underline
ESC &k0S Select 10 CPI ESC &k2S Select 16.7 CPI
ESC &k4S Select 12 CPI ESC &k8S Set Dbl Size
ESC &l1L Enable Perf Skip ESC &l0L Disable Perf Skip
ESC (0U Set Primary Lang
ASCII ESC (8U Set Primary Lang
Roman8
ESC (0@ Set Primary Lang
Default ESC (0L Set Primary Lang Line
ESC (0E Set Primary Lang
Roman8 ESC (1E Set Primary Lang UK
ESC (0G Set Primary Lang
German ESC (0F Set Primary Lang
French
ESC (0D Set Primary Lang
Danish ESC (0S Set Primary Lang
Swedish
ESC (1K Set Primary Lang
Katakana ESC (0K Set Primary Lang
Japanese
ESC (0O Set Primary Lang
OCRA ESC (1O Set Secondary Lang
OCRB