Dascom T2250 User Guide IGP for Dot Matrix Printers - Manual (Page 66)

IGP for Dot Matrix Printers User Guide
66
Exceptions
The following are discrepancies between the Genicom 4840 printer and Genicom manual:
ESC [p1 d AVM beyond 15840 decipoints is ignored
ESC [p1 e
RVM uses the decipoint parameter exactly (no round off to 1/144ths)
RVM greater than 15840 decipoints is ignored
ESC [p1;p... m
p1 = 11 - Data Processing
ESC [p1 !p
Syntax not ESC[p1;p2 !p
ESC [p1;p2;p3 q
p3 = 0-4 - ignored
p2 and p3 are not ignored in any p1 mode
ESC [p1;p2;p3 r
p3 is measured from BOF, not TOF
Differences between the T3116 IGF Option’s Genicom ANSI emulation and the Genicom 4840
printer:
ESC [p1;p... m p1 = 19 - Gothic
ESC [p1;p2;p3 q
p1 = 0 - 60H x 72V
p1 = 1 - 144H x 72V
p1 = 2 - 144H x 144V
p3 = 5 - 144H
p3 = 8-10 - 72H
ESC Q
Self-test command is not supported
ESC ] 5
Font download is not supported
ESC [p1 SP }
Font download control is not supported
ESC [ p1;p2 sp G
Line heights greater than 9 inches are not supported
ESC [ > 1 h
Proportional spacing is not supported
ESC [p1 x
Supported as follows:
p1 = 0 US
1 German
2-3 French
6, 23 Italian
7, 20 UK
8, 24 Spanish
9-10 Norwegian/Danish
11-12 Norwegian/Danish II
13-16 Swedish/Finnish
437 Code Page 437 USA
850 Code Page 850 Multilingual
863 Code Page 863 French Canadian
8575 Roman 8
Latin 1