Specifications – Det-Tronics X7050 xWatch Industrial Video Surveillance Camera User Manual
Page 5
3.1
95-8600
3
speciFications
operatinG temperature—
–20°C to +70°C
haZarDous location ratinG—
–40°C to +75°C
storaGe temperature—
–30°C to +80°C
relative humiDity—
5 to 95%, non-condensing
inGress protection—
NEMA/Type 4X
sensor—
Color low light CCD, 0.3 lux
resolution—
NTSC: 768 by 494 pixels, 570 lines of resolution
PAL:
752 by 582 pixels, 570 lines of resolution
viDeo output—
NTSC or PAL two wire twisted pair, unshielded,
Category 5
shutter—
Electronic shutter, 1/60 – 1/100,000 second
operatinG voltaGe—
24 Vdc nominal, 18 to 30 Vdc
poWer consumption—
2.8 watts
FielD oF vieW options—
–
90 degrees, 2.33 mm lens, wide angle to match field
of view of flame detector.
–
50 degrees, 4.33 mm lens, normal angle for general
duty.
–
30 degrees, 8.0 mm lens, narrow angle for focus on
a specific point of interest.
(note: Fov degrees are approximates)
user interFace—
Conventional off-the-shelf video switchers or digital
video recorders (DVR) can be used for the interface.
housinG material—
Aluminum or 316 Stainless Steel
shippinG WeiGht
(Approximate)—
Aluminum:
1.2 pounds (0.6 kg)
Stainless Steel: 2.2 pounds (1.0 kg)
Dimensions—
See Figures 2, 3 and 4.
certiFications—
For complete approval details for the xWatch explosion
proof camera model X7050
, refer to the appropriate
Appendix:
Appendix A - FM/CSA
Appendix B - ATEX/IECEx.
Figure 2— xWatch camera Dimensions in inches (centimeters)
4.75 (12.06)
2.5
(6.35)
1/2 INCH NPT
OR 20 MM
A2330
POSITIONING SWIVEL NUT
0.25 (.64) DIAMETER (3)
2.5 (6.4) DIAMETER
2.0 (5.1) DIAMETER
DETECTOR LOCK NUT
120° ± 2 (2)
45° (2)
2-1/2
(6.4)
A2368
Figure 3—Dimensions of Q9001a aluminum mounting bracket
in inches (centimeters)
5.25
(13.3)
2.5
(6.4)
MOUNTING BASE
1/2 INCH NUT USED TO ADJUST
ELBOW TO DESIRED ANGLE
1-3/8 INCH NUT USED TO ROTATE
SWIVEL/CAMERA ASSEMBLY TO DESIRED POSITION
3/4 INCH NUT USED TO SECURE
XWATCH TO SWIVEL MOUNT
A2370
Figure 4—Dimensions of Q9001h stainless steel mounting bracket
in inches (centimeters)
FM
APPROVED
®