Det-Tronics S3 Graphics - Manual (Page 40)

6-1 LOGS
Version 6.0
Overview of features
S 3 maintains three different types of logs; disk, configuration and calibration. All can be viewed and printed from
this utility.
Selecting the “Logs” button will display the “Select Log Type” window to choose which type of logs are to be
accessed.
DCD Disk Log’s are a chronological list of alarms and events that have occurred during a 24 hour period while
the DCD was online. Each log runs from midnight to midnight and each days log is stored by date.
Configuration logs track all configuration changes made to the system including point creation and deletion,
setpoint changes, etc.
Calibration logs are the collation of data from queries of the distributed calibration histories of field devices on
the network. The user determines what port, what type of device, a time frame and S 3 will retrieve the data from
the field devices and put it into a report. The daily disk, configuration log and any previous logs from this utility
can be viewed or printed.
SELECT LOG TYPE