Det-Tronics EA2100CG Eagle 2000 Communication Gateway - Manual (Page 42)

ORDERING INFORMATION
For assistance in ordering or designing an Eagle sys-
tem, contact the nearest Detector Electronics office.
When ordering, please specify:
EA2100CG – Eagle Communication Gateway
EA2200DCU EX – Eagle Digital Communication Unit for
combustible gas sensors
EA2200DCU UNIV – Eagle Digital Communication Unit
for toxic gas or oxygen sensors
EA2200DCU IS – Eagle Digital Communication Unit for
intrinsically safe sensors
EA2300CM – Eagle Communication Module
EA2400NE – Eagle Network Extender
EA2500RM – Eagle Relay Module
MOUNTING RACKS
A Q4004 Mounting Rack is required for installation of the
gateway. Q4004 racks can also house gas or flame
controllers in any combination. See Figures 22 and 23.
ACCESSORIES
Magnetic Calibration Tool
Silicone Free Grease
Open Frame Power Supply – 3.6 amperes at 24 vdc
Open Frame Power Supply – 12 amperes at 24 vdc
W4810 Power Supply mounted in explosion-proof
enclosure – 1.0 ampere at 24 vdc
REPLACEMENT PARTS
Part Number Description
006032-001 Communication Module without ribbon
cable (Communication Module/DCU)
006031-001 Terminal Board (Communication
Module/DCU)
006108-001 Transmitter Board (Combustible gas DCU)
006148-001 Network Extender Circuit Board
006122-002 5–1/4 inch Ribbon Cable (DCU)
101173-023 2 inch Standoff (DCU)
006122-001 2–3/4 inch Ribbon Cable
(Communication Module)
101173-021 1.625 inch Standoff (Communication
Module)
REFERENCE LIST
Additional information on Eagle 2000 products is avail-
able in the following publications:
Specification Data Sheets:
90-1088 Communication Module
90-1093 DCU
90-1089 Network Extender
90-1097 Relay Module
90-1090 Gateway
Instruction Manuals:
95-8425 Communication Module
95-8426 DCU
95-8430 Network Extender
95-8423 Relay Module
95-8433
System Configuration
95-8453 System Configuration Matrix
38