ECOXGEAR IRD4000: Allegro - Manual (Page 12)

12
Step 2 - Scan for a wireless network connection
When the display show <Scan for networks>, press the ‘Select’ button. (NOTE: IF you make an error at
any point, press the ‘Back’ button to return the previous screen)
The ALLEGRO will now scan for all available wireless networks and will display:
Scanning
IIIIIIIIIIIIIIIIIII
IF the radio does not find a wireless network router, the display will show:
No networks
Found
If this happens after subsequent attempts you should setup your wireless access point working - see the
instructions supplied with your wireless network.
When ALLEGRO finds your wireless network, the display will show ESS-ID for the access point on the
screen - this name is the name ascribed to the access point by the person who set up the network - for
example:
< My Home Network >
It is possible, and in some locations highly likely, that your radio will find more than one wireless access
point, in which case you can choose which one you want to connect to. Turn the knob on your radio to
see the ESS-ID for each access point your radio has found.
For optimal performance you may want to check your home network settings to make sure your radio is
on a deferent channel than your neighbors. To do this please consult your Wi-Fi router owner’s manual