ERICO TDX50 Series - Manual (Page 4)

34600 Solon Road
Solon, Ohio 44139
(440) 248-0100
www.erico.com
TDX Series 10 Year Limited Warranty.
This Product has a limited warranty to be free from defects in materials and
workmanship for a period of ten (10) years from the date of dispatch from
the Manufacturer. This warranty includes, but is not limited to, damage due
to over-voltages, damage due to an abnormally high number of surges and
damage due to direct or indirect lightning strikes.
THE PURCHASER ACKNOWLEDGES THAT LIGHTNING IS A
NATURAL EVENT WITH STATISTICAL VARIATION IN BEHAVIOR
AND ENERGY LEVELS WHICH MAY EXCEED PRODUCT RATINGS,
AND THAT 100% PROTECTION IS NOT OFFERED AND CANNOT BE PROVIDED FOR. IN
ADDITION, THE PURCHASER ACKNOWLEDGES THESE RISKS AND HAS
DETERMINED THAT THEY ARE ACCEPTABLE FOR THE APPLICATION OF THE
PRODUCT. THE PURCHASER IS SOLELY RESPOSIBLE FOR ENSURING THAT THE
PRODUCT IS INSTALLED IN STRICT ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS, AMERICAN NATIONAL STANDARD ANSI/IEEE C62.41.2 AND ALL
RELEVANT NATIONAL ELECTRICITY AND SAFETY STANDARDS.
The Manufacturer’s liability is limited to the repair or replacement of the product (at the
Manufacturer’s sole option) which, in the Manufacturer’s judgment, has not been abused, misused
or altered. The supply of replacement Products may be conditional upon the Manufacturer
performing a site power quality audit and implementation by the Purchaser of any resultant
recommended corrective measures.
EXCEPT AS STATED IN THE FIRST PARAGRAPH ABOVE, THE MANUFACTURER
MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AND SPECIFICALLY
DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
The scope of this warranty does not provide for claims against the Manufacturer for consequential
damages or loss of operations or service or profits. This warranty does not indemnify the Purchaser
from any consequential claims by a third party for damages or loss of operations or service or
profits. The giving of, or failure to give, any advice or recommendations by the Manufacturer shall
not constitute liability.
Customers should contact their nearest Manufacturer’s agent to obtain a Return Material
Authorization (R.M.A.) which must be clearly marked on the outside of the shipping container as
well as on the unit being returned. It should then be forwarded, freight brokerage, and duty
prepaid, to: ERICO, Inc. 34600 Solon Road • Solon, Ohio • (440) 248-0100 along with a note
describing the problem. Proof of purchase should also accompany the request for warranty repair
or replacement. Return freight is customer collect.