ERICO 3000 ERITECH SYSTEM - Manual (Page 38)

INSTALLATION, OPERATION AND MAINTENANCE MANUAL
36
www.erico.com
Figure 21: Cutting dimensions
600 mm (23 5 /
8
in.)
380 mm (15 in.)
20 mm
(
6 /
8
in.)
70 mm (2 3 / 4 in.)
Copper
Conductor
Copper Strands and
Double Tape Layer
Triple Layered
Insulation Layer
PVC Tape to Stop Copper Tape from Unravelling
Copper
Tape Black Outer
Sheath
Compression Cone Compression Ring
Compression Nut
Filler Core (Black)
Copper Strands Splayed
Out to Allow Fitting of
Compression Cone
Double Copper Tape Layer
Figure 22: Positioning the compression coupling.
Wind Back Layers of Copper Tape
Over Copper Strands to the End
Coldshrink
Compression Ring Compression Nut
Figure 23: The termination coupling is fitted to the downconductor
ready for the main coupling body to be fitted.