ETC Cobalt Family v7.0.0 - Manual (Page 642)

640
Percent times, or seconds?
Times for Moving Devices are set in seconds (absolute) or as a percentage of the IN time of a
Sequence Step.
The default setting is percent. This means that all FCB-Times will equal the IN time of a Sequence
Step, and all FCB-Delay Times will execute as a percentage of the IN time of a Sequence Step.
In the example above, the FCB Times are 100% of the In time (5 seconds).
If the FCB Times are set to 50% of the IN-time they will be 2.5 seconds at an in time of 5 seconds.