ETC Cobalt Family v7.0.0 - Manual (Page 838)

836
Load a chase sequence to a master
These functions are used to load chase mode sequences to masters.
Function Keys Feedback
Load a chase [#] [SEQ] &
[Master_Key] Chase # is loaded to the
Master Playback. The
number and name are
shown in the master
display.
Load several chases
[#] [SEQ] &
[Master_Keys] Hold SEQ and keep
pressing new Master keys
to load the next stored
Sequence/Chase.
NOTE
You can load a Chase directly from the Sequences List as well. See
Sequences
List - Insert/Delete/Load .
NOTE
Connect a Master to the Master Playback controls to get more control over
the Chase. See
Master Playback .
Master settings for chase mode sequences
These are the settings you can change for masters with sequence content.
Hold SETUP and press the Master key to open the settings.