ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 317)

23
Using About 299
[About]
When [About] is pressed when the command line is clear, the CIA presents the following
information:
• System address count
• Software version
• Copyright notifications
• Device name
• Assigned as (Primary/Backup/Client/Offline)
• User ID
• Number of patched and unpatched addresses
• Priority (ACN and Net2)
• IP Address(es)
About System
When {About System} is pressed, the CIA displays a list of all network devices that are connected
to Eos. These network devices include:
• Consoles
• RPU and RPU3
• Net3 RVI and RVI3
• PC & Mac Clients
• Net3 Show Control Gateways
• Net3 I/O Gateways
• Legacy Unison CMEi processors
• Unison Paradigm processors
• CEM+ and CEM3
• Net3 Gateways
• ETCNet2 Nodes
Each network device will display the following information:
• Device Type
• Name/Component
• Status
• Connected
• IP Address
N o t e : Devices may appear more than once in this list if they have multiple roles on the
network.
N o t e : If any errors or warnings are present at the rack, the CEM+ / CEM3 will display in
red.