ETC Source Four XT HID Zoom Half Shield User Manual
Installation
Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT Via Pieve Torina, 48, 00156 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service: (Americas)
(UK)
(DE)
(Asia)
Web:
www.etcconnect.com
Copyright © 2011 ETC. All Rights Reserved. Product information and specifications subject to change.
7065M2150
Rev A Released 2011-08
ETC intends this document to be provided in its entirety.
Page 1 of 2
Installation Instructions
Source Four XT HID Zoom Half Shield
The Source Four XT HID Zoom Half Shield is used to provide glare control at specific angles to the fixture.
The Half Shield can be mounted in four positions on the front of the fixture. It can also be combined with the External
Media Holder. In this case, the Half Shield is installed last. The Half Shield is provided with four stainless steel hex screws
for attaching to the fixture.
Reference Source Four XT HID Installation Instructions and Source Four XT HID External Media Holder Installation
Instructions for information about electrical requirements and installing the fixture. Both instructions are available for
download at www.etcconnect.com.
Installation
To install the Half Shield:
Step 1:
Face the shallow side of the shield toward the object you are trying light, with the tallest side of the shield
providing glare control away from the lighted object.
Step 2: Align the Half Shield with the four mounting holes on the front ring of the fixture. Refer to the illustration on the
next page.
Step 3: Secure the Half Shield with the four hex screws.
WARNING:
● Do not use this fixture with a damaged power lead. If the power lead (cordset)
is damaged, it must be replaced.
● Do not expose the interior of the fixture to moisture. Do not stand in water
while installing or servicing the fixture.
Failure to follow these warnings can result in serious injury or death.
WARNING:
● Do not use the fixture with a damaged power lead. If the power lead (cordset) is
damaged, it must be replaced.
● Do not expose the interior of the fixture to moisture. Do not stand in water while
installing or servicing the fixture.
Failure to follow these warnings can result in serious injury or death.
WARNING:
● Do not use the fixture if glass lens is deeply scratched or cracked. Damaged lenses
must be replaced.
● Do not mount the fixture on or near combustible surfaces.
Failure to follow these warnings can result in serious injury or death.