EUCHNER MGB-L0-xxxAPx-xxx - Manual (Page 2)

2
Operating Instructions MGB-L0...AR.-... and MGB-L0...AP.-...
Contents
1 About these operating instructions 3
1.1 Scope 3
1.2 Symbols used 3
2 Correct use 4
3 Exclusion of liability and warranty 5
4 General safety instructions 6
5 Function 7
6 System Overview 8
6.1 Interlocking module MGB-L.-... 8
6.2 Handle module MGB-H-... 8
6.3 Escape release MGB-E-... (optional) 8
6.4 Dimension drawing 9
6.5 Lockout bar 10
6.6 Escape release (optional) 11
7 Mounting 13
7.1 Mounting color cover 13
8 Changing actuating direction (here: from right to left) 15
9 Protection against environmental effects 16
10 Electrical connection 17
10.1 Safety in case of faults 18
10.2 Fuse protection for power supply 18
10.3 Requirements for connection cables 19
10.4 Notes on cable laying 19
10.5 Changing device configuration (using DIPswitches) 20
10.6 Notes on operation with control systems 21
10.7 Operation as separate device 23
10.8 Operation in an AR switch chain 24
10.9 Information on operation in an AR switch chain 25
11 Setup 26
11.1 Teach-in operation (only for MGB unicode) 26
11.2 Mechanical function test 26
11.3 Electrical function test 27
12 Technical data 28
12.1 Typical system times 29
13 System states 29
13.1 Key to symbols 29
13.2 System status table MGB-AR 30
13.3 System status table MGB-AP 31
14 Troubleshooting and assistance 32
14.1 Fault reset 32
14.2 Help on troubleshooting in the Internet 32
14.3 Help on mounting in the Internet 32
15 Service 32
16 Inspection and service 33
17 Declaration of conformity 34