Euramco Safety VX700 - Manual (Page 13)

8.0 Operation
8.1 VX700 Control Features, (Continued)
3. Water Valve
The VX700 is equipped with an annular array of eight (8) mister nozzles in
support of PPA and cooling applications. Water for the misters is supplied
externally from a garden hose to a residential or fire truck water source.
Note: The pressure of the water source must be restricted to a maximum of
125 psi.
A water valve installed in series between the water input connection and the
VX700 misters is located above the control panel and to the left. A water
source must be connected to the VX700 and the water valve must be turned
ON to activate the mister nozzles.
4. Auxiliary Power
The Auxiliary Power Port is located to the left of the control panel on the
backside of the battery compartment.
The Auxiliary Power Port provides 12VDC with a 125 amp capacity. The
Auxiliary Power Port can be used to provide power for various 12VDC
appliances, radios, remote lighting and other applications. The Auxiliary
Power Port can also be used to jump start the VX700 should the battery lose
its charge.
For special cable adapters for the Auxiliary Power Port call Euramco Safety
for assistance.
8.1.3. Motor
1. Honda GX630 V-Twin Motor
The VX700 is built around a Honda GX630 23HP V-Twin gasoline powered
motor. Motor controls panel include a choke, throttle lever, a keyed ignition
switch, hour meter, and oil alert feature described below. All the motor
controls and alerts are conveniently located on a motor control panel
attached to the motor. See Figure 3, Honda GX630 Motor Control Panel.
Please read the Honda GX630 Owner's Manual to become thoroughly
familiar with motor preparation, maintenance, and operation before use.
2. Choke
The Choke knob facilitates cold motor starting.
Page 12