Advanced features, Tech corner – EZWatch EZBR-0519HD User Manual
Page 8
8
Advanced Features
The EZ-Bridge™ has many advanced features if more functionality is
desired. To access the advanced features, click on Advanced Web at
the top of the menu tree. This will activate the advanced menu options.
The EZ-Bridge™ can operate as Access Point, Client, WDS, AP+WDS,
Point to Point. Go to WIRELESS | BASIC SETTINGS to change wire-
less mode. Go to ETHERNET | IP SETTINGS to change network op-
eration mode from Bridge (default) to Router.
Since documentation for these advanced modes is too extensive to
cover here please retrieve the documentation online at
TECH CORNER
Additional Information you may find useful
1.
RAIN, SNOW, ICE – The frequencies being used by the EZ-
Bridge™ will not be affected by heavy rain or falling snow. You should
not see any performance degradation due to inclement weather. If snow
or ice collects on the front of the antenna, you may see some reduced
performance assuming you are shooting a long distance ( >2miles) and
the ice or snow buildup is greater than 1” thick on the surface of the
antenna. For this reason, we suggest mounting under an eave of a
house if feasible for your particular situation.
2.SUN AND HEAT– The EZ-Bridge™ is constructed of all UV pro-
tected materials so it will survive for many years in the most extreme of
solar environments (ie; an Arizona rooftop during the summer). The unit
has been tested and qualified for constant operation at over 122 deg F
ambient temperature. Even though the EZ-Bridge™ is designed for long
term survivability in extreme environments, we would still recommend
that the unit be mounted in a more protected location, like under a roof
eve, if possible. Of course if line of sight is better with the antenna
mounted in a non-protected environment then we would recommend
the better line of sight mounting location.
3.LIGHTNING – Lightning is the single worst enemy of outdoor elec-
tronics equipment. No electronics will survive a direct strike but there
are close proximity strikes that can cause huge electrical fields to be
generated which can damage electronic equipment. We have taken
special care in the design of the EZ-Bridge™ unit to ensure proper