EZWatch EZ-CLOCKDVR - Manual (Page 2)

3) Plug the camera in to a TV, Monitor, or other device using the RCA video inputs on the
camera cable. Switch your TV/Monitor to the video input you’ve plugged it into. You should
now see the camera image on the screen.
4) Press the Play/Pause button on the remote control to begin playing back the most recently
recorded clip.
5) When you are finished playing back clips, press the stop button to return to the live video
image.
To delete all recorded video clips :
1) Plug the camera in to power, and turn the recorder on using the ‘VR On/Off’ button on the
top of the Clock Radio.
2) Ensure that a SD memory card has been inserted into the back of the Radio.
3) Plug the camera in to a TV, Monitor, or other device using the RCA video inputs on the
camera cable. Switch your TV/Monitor to the video input you’ve plugged it into. You should
now see the camera image on the screen.
4) Open the camera menu by pressing the menu button on the Infrared Remote. Go down to
the ‘SD Card’ menu and press Menu/OK to open it up. Select ‘Format’ and hit Menu/OK.
5) Press Menu/OK to format the SD card and delete all clips. WARNING : THIS ACTION
CANNOT BE UNDONE. Once it has completed, all clips will be cleared.
Play/Pause Button Record Button
Return/Stop Button
Unused
Unused