EZWatch EZ-CLOCKDVR - Manual (Page 7)

SD CARD OPTIONS : The options here allow you to configure how the camera records, what to do when
the card is full, and allows you to clear the card of all recordings.
Max File Size:
This allows you to set how big to make
each file. You do not normally need to change this
unless directed to by a technical support
representative.
Card Full :
This option tells the camera what to do when
the card fills up to maximum capacity. ‘Stop’ tells the
camera to stop recording until the card is manually
cleared. ‘Loop’ will tell the camera to delete the oldest
clips to make room for new ones once the card is full.
Format : This is the option you must select to clear the SD
memory card of all recordings. Formatting cannot be undone, so
do not use this option if there are any images you wish to keep!
If you wish to format, press the ‘Menu/OK’ button. Otherwise,
press the Return/Stop button.
SYSTEM STATUS : This screen shows you the status of the system,
including what the ‘card full’ action to take is, and the recording
settings for all recording types (Manual, Alarm, Motion Detection,
Continuous). There are no settings on this screen to change.
Power-On Setup : This menu allows you to change the menu language (English, French, Spanish,
German, Italian, Dutch, Chinese, and Japanese). You can also set the camera to display in NTSC or PAL
format. NTSC is the standard format for televisions in North/South America and Japan. PAL is the most
common format in Europe, Africa, Australia, and Asia.
Factory Default : This will reset all camera settings (Schedules, quality settings, language, TV format, etc)
to factory default settings.