Blaupunkt LOS ANGELES MP71 - Manual (Page 11)

11
ENGLISH
FRANÇAIS
ESP
AÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Tone and volume
Note:
You can make separate adjustments to the
bass, treble and loudness for each audio
source.
Adjusting the bass
➮
Press the AUD button,
9
.
“BASS” appears in the display.
➮
Press the or buttons
7
in order to
adjust the bass.
When you have finished the adjustment
➮
Press the AUD button
9
.
Adjusting the treble
➮
Press the AUD button
9
.
“BASS” appears in the display.
➮
Press the or button
7
as often as
is necessary for “TREBLE” to appear in
the display.
➮
Press the or buttons
7
in order to
adjust the treble.
When you have finished the adjustment
➮
Press the AUD button
9
.
Loudness
Loudness refers to a bass boost at low vol-
ume levels matching the ear’s sensitivity.
➮
Press the AUD button
9
.
“BASS” appears in the display.
➮
Press the or button
7
as often as
is necessary for “LOUD” to appear in
the display.
➮
Press the or buttons
7
in order to
adjust the loudness. “LOUD OFF”
means that the loudness function is in-
active, while “LOUD 6” indicates the
maximum loudness boost.
When you have finished the adjustment
➮
Press the AUD button
9
.
Adjusting the left/right volume
balance
➮
In order to adjust the balance, press the
AUD button
9
.
“BASS” appears in the display.
➮
Press the or button
7
as often as
is necessary for “BAL” to appear in the
display.
➮
Press the or buttons
7
in order to
adjust the balance between left and
right.
When you have finished the adjustment
➮
Press the AUD button
9
.
Adjusting the front/rear volume
ratio (fader)
➮
In order to adjust the fader, press the
AUD button
9
.
“BASS” appears in the display.
➮
Press the or button
7
as often as
is necessary for “FADER” to appear in
the display.
➮
Press the or buttons
7
in order to
adjust the balance between front and
rear.
When you have finished the adjustment
➮
Press the AUD button
9
.
TONE AND VOLUME