Blaupunkt LOS ANGELES MP71 - Manual (Page 16)

16
PTY-EON
If you specify the programme type and start
seek tuning, the unit will switch from the cur-
rent station to a station of the selected pro-
gramme type.
Note:
● If no station is found that corresponds to
the selected programme type, you will
hear a beep sound and “NO PTY” ap-
pears briefly in the display. The radio
will then retune to the station that was
received last.
●
If the tuned radio station or another sta-
tion on the broadcasting network broad-
casts the required programme type at a
later point in time, the radio automatical-
ly switches from the currently tuned sta-
tion or from CD mode / CD changer
mode to the station whose programme
type matches the one you selected.
Switching PTY on/off
To use the PTY function,
➮
press the TUNE button
>
in radio
mode.
The radio functions menu appears in the dis-
play.
➮
Press the softkey
4
that corresponds
to the “PTY” display item.
When PTY is activated, the display briefly
shows the programme type that was select-
ed last. PTY appears in the display.
To return to the main radio menu,
➮
press the TUNE button
>
or wait eight
seconds.
The settings are saved.
Selecting a programme type and starting
seek tuning
➮
Press the or button
7
.
The current programme type appears in the
display.
If you want to select another programme type,
➮
keep pressing one of the buttons
7
until the required programme type is
displayed.
Or
To select a stored programme type,
➮
press one of the softkeys
4
corre-
sponding to the “ST1” – “ST6” display
items.
The selected programme type is displayed
briefly. To start seek tuning,
➮
press the or button
7
.
The next receivable station corresponding to
your selected programme type will then be
tuned into.
Storing a programme type on a station
button
➮
Select a programme type using the or
button
7
.
To store a programme type,
➮
press and hold (for longer than one sec-
ond) one of the softkeys
4
correspond-
ing to the “ST1” – “ST6” display items.
The programme type is now stored in the
selected location.
Optimising radio reception
Treble cut in the presence of interference
(HICUT)
The HICUT function improves the sound
when radio reception is poor. When interfer-
ence is being received, the treble is automat-
ically cut which also reduces the level of in-
terference.
Setting HICUT
➮
Press the MENU button
8
.
➮
Press the or button
7
until “HI-
CUT” appears in the display.
➮
Press the or buttons
7
to adjust
the HICUT function.
RADIO OPERATION