Barco R9001390 - Manual (Page 23)

5-9
Connections
5975938 BARCOREALITY 9200TCR+ 020798
D IG IT A L V ID E O S O U R C E
D ig ita l
V id e o
R G B V R G B H / C V
On 98 27
910 R G B H / C V H
9,'(2,1387
9,'(2 69,'(2
RS 232 IN REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY COMMUNICATION PORT
(800-PERIPHERALS) RS232 OUT
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE IR-RECEIVER
SDI IN SDI OUT
Ay‚h‡vtГ‚ Г‚Гsy‚h‡vtÃvƒˆ‡
Floating
Non-Floating
E'ÃT’pÆryrp‡v‚
Trƒh h‡rƒp T’pÃt rr
- - - - -
Straps on Module Level :
Floating or non-floating input.
Red : J3 : strap "yes" : non floating strap "no" : floating
Green : J4 : strap "yes" : non floating strap "no" : floating
Blue : J5 : strap "yes" : non floating strap "no" : floating
H/C : J6 : strap "yes" : non floating strap "no" : floating
V : J7 : strap "yes" : non floating strap "no" : floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 : separate sync or sync on green.
Factory preset : separate sync.
Serial Digital Input (slot 5)
Full compatibility with digital Betacam, or other digital video
sources.
This avoids the need for analog video processing anywhere in the
video production chain and guarantees the ultimate image quality.
An active loop-through of the SDI input signal is provided for
monitoring or for double and or triple stacking applications.
Connections :
One BNC input terminal and one active loop-through BNC output
terminal.
The input is always 75 ohm terminated. The output inpedance of
the SDI out is 75 ohm.
Input selection :
Key in 5 on the RCU or the local keypad.
Note : When a RCVDS05 is connected to the projector, the
SDI input is available by keying in 85 on the RCU.