Barco R9001390 - Manual (Page 36)

8-8
Random Access Adjustment Mode
5975938 BARCOREALITY 9200TCR+ 020798
3
Dynamic Color Depth
Increases color contrast for all video and data sources.
Highlight Dynamic color depth by pushing the control disc up or down
and press ENTER to select.
OFF : default position
MIN : half of the effect of MED.
MED : maximum color contrast without change in color tint or loss of
detail.
MAX : maximum color contrast.
Gamma
With the gamma correction adjustment, it is possible to accurately set
the gamma of the projector image.
To change the gamma value, highlight Gamma by pushing the control
disc up or down and press ENTER.
PICTURE TUNING
SYNC [SLOW]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
GAMMA = 2.2
Decoding EBU/IRE
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the
default American IRE standard or via the European EBU standard.
Decoding a NTSC signal using the European EBU standard may result
in a greenish tint.
Highlight Decoding by pushing the control disc up or down and press
ENTER to select.
Select with or
then <ENTER>
<EXIT> to return.
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
Select with or
then <ENTER>
<EXIT> to return.
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
Select with or
then <ENTER>
<EXIT> to return.
Noise Reduction
Reduces noise and pixel jitter in all video and data sources.
Highlight Noise reduction by pushing the control disc up or down and
press ENTER to select.
OFF : off
MIN : removes system noise.
Auto : noise reduction without motion blur.
MAX : maximum noise reduction (may cause motion blur).
PICTURE TUNING
CTI [ON]
STILL VIDEO [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
EDGE ENHANCEMENT
OFF
DYNAMIC COLOR DEPTH
MIN MED MAX
NOISE REDUCTION
MIN AUTO MAX