Gardman Granite Cobbles - Manual

www.gardman.co.uk
19195AT Granite Cobbles Outdoor Water Feature
Contents
• Top section, bottom section, pump and transformer
Assembly Instructions
• Unpack all items and place on a flat surface
• Connect the lead from the LED to the extra lead from the pump. Connect the rubber tube to the
pump (A)
• Fill the feature with water to within 50mm of the rim of the bowl
• Place the top section onto the bottom section, ensuring it is located onto the supporting rim
correctly (B)
• Connect the long lead from the feature to the transformer (C)
• Insert the plug from the transformer in to the power socket and switch on. If installed correctly water
will start to flow from the feature. Please note: On first use, there may be air in the pump and it may
take a few moments for the water to come through
Please read the assembly instructions and pump instructions carefully prior to installation.
B A
C