Meanings of the leds, Lcd screens, 3 meanings of the leds – GeoDesy GD-3000 Series User Manual
Page 14: 4 lcd screens
14
Place the two spacers where the figure shows to.
Open the spacers until it reaches the bottom of the
upper plate of the ABU! Repeat this on the back side
too!
Then do the same on the remote side too!
5.3 Meanings of the LEDs
Power: The head is powered up.
RX-OK: Received beam is good for
communication.
TP Lk: Copper link between the head and the Network equipment.
FO Lk: The recived signal form the remote end is modulated and .
R-V/TP: Remote end is visible for the management system and there is TP
connected to remote end
– same as TP-Lk but displays it on the remote end.
5.4 LCD screens
Please press the button on the backside of the unit to scroll between the screens!
1.screen
Loc (local level): Light received from the remote end.
Rem (remote level):
Remote Sites Received level.
Op: optimal
Ov: overload
2.screen
HeadSN: The laser head serial number
0000001
3.screen
Temperature: Temperature inside the laser head.
TT°C
4.screen