GeoDesy FSO Giga Next series - Manual (Page 32)

GeoDesy Kft. Telefon: 06-1-481-2050
H-1116 Budapest, Kondorfa str. 6-8. Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy-fso.com
32
Horváth Holding
Investment PLC.
Default: auto mode, the system will automatically regulate the incoming light to the
optimal level of Udet, preventing the system to get oversaturated.
Manual: The incoming light can be regulated manually, the use of the manual mode
is strongly suggested during installation. The controller won’t start the regulation of
the incoming light, so the alignment will be much more accurate. (it can be set by
doing an unfinished booting during log in so we do not have to log on to the web
during the installation process).
Calibrating: it is an extra service. The attenuation can be set manually (according to
the scale) and the motor can also be skipped manually via the web. In order to see
where the motor is there are cadences. The system has to make a calibration of the
length of the circuit between the two end station in order to see how many steps are
left. Follow-up calibration can be made with the calibrate button.