Brother HL-2400C Series - Manual (Page 39)

USER’S GUIDE
2–12
Follow these steps to set paper and install the Media Cassette:
✒ Note

Be sure to select the same paper size as the paper to be used from your
application software, or correct printing cannot be obtained.
If your application software does not support paper size selection in
its print menu, you can change the paper size with the
Mode button in
the FORMAT MODE. For paper size change information, see
“MODE Button” in Chapter 4.

The paper size has been factory set to letter or A4, depending upon
the final destination of the printer.
•120V model: Letter size paper set.
•220/240V model: A4 size paper set.

Small Size Setting: See “Control Panel” in Chapter 4
Load paper into the Media Cassette as follows:
1. Pull the Media Cassette out of the printer.
Fig. 2-17 Removing the Media Cassette