Brother HL-2400C Series - Manual (Page 65)

USER’S GUIDE
4–2
Printer Status Messages (on the upper row)
The following table shows the printer status messages that are displayed
during normal operation:
Printer Status Message Meaning
00 READY 001P T1 The printer is ready to print.
00 IDLE 001P T1 The printer is idle. (BR-Script 2 mode only)
AUTO PCL5C The printer is off-line and currently in HP
PCL5C mode under AUTO emulation
mode selection.
HP PCL5C The printer is off-line and in HP PCL5C
mode under HP LaserJet emulation mode
selection.
00 BUSY 001P T1 The printer is busy. (BR-Script 2 mode
only)
00 SLEEP 001P T1 The printer is in sleep status (power save
mode).
01 PRINT 001P T1 The printer is printing.
01 PR300 001P T1 The printer is printing by decreasing the
resolution from 600 dpi to 300 dpi because
of insufficient memory.
02 WAIT 001P T1 The printer is warming up.
04 SELF TEST The printer is performing self-diagnosis.
05 TEST PRINT The printer is printing the test pattern.
06 DEMO PAGE The printer is printing the demonstration.
06 PRINT CONFIG The printer is printing the list of the current
printer settings.
06 PRINT FONTS I The printer is printing the list of the internal
or resident fonts.
06 PRINT FONTS C The printer is printing the list of the
optional fonts stored in an installed font
cartridge/card.
06 PRINT FONTS P The printer is printing the list of the
permanent download fonts.
06 CARD1 PRINT The printer is printing the contents of a
flash memory card in slot 1.
06 CARD2 PRINT The printer is printing the contents of a
flash memory card or HDD card in slot 2.