Great Northern Popcorn 5, 7, 9, 11 Roller Hot Dog Roller COOKER/GRILLERS - Manual (Page 3)

1. You will need this manual for the safety warnings
and precautions, operating, inspection, mainte-
nance and cleaning procedures. Keep your
invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual
and invoice in a safe and dry place for future
reference.
2. The warnings, cautions and instructions dis-
cussed in this instruction manual cannot cover all
possible conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors which
cannot be built into this product, but must be
supplied by the operator.
3. NEVER use this product for anything other than
its intended use. NEVER modify this product.
Failure to comply with the precautions, warnings
and recommendations in this manual will nullify
your warranty and may result in injury or even
death.
4 . ALWAYS ensure that this hot dog roller is
plugged into a grounded outlet with the proper
power supply available.
5. DO NOT unplug the machine by pulling or
tugging on the power cord. Firmly grasp the plug
and remove from outlet.
6. MAKE SURE that the power outlet, plug and
power cords used are in good condition. Worn,
frayed or damaged plugs, cords and outlets
should be replaced or repaired by a certified
electrician who is properly qualified to meet local
safety and electrical codes. Power supply cords
should be replaced by the manufacturer.
AVOID using extension cords or 3-prong
adaptors.
7. To reduce the risk of electrical shock or fire,
MAKE SURE that your unit is properly grounded.
NEVER TAMPER WITH, REMOVE OR CUT THE
GROUNDING PIN!! The wall outlet used with this
roller MUST be properly grounded. If you do not
have a grounded outlet, have one installed by a
certified electrician who is properly qualified to
meet local safety and electrical codes.
8 . Make sure your machine is unplugged when you
conduct any maintenance or repair. A qualified
service technician should always perform service
or repair.
9. This product is certified for household or
commercial use.
10 . Do not cover the power cord. DO NOT immerse
cord in water or use in high traffic areas. DO NOT
run cord over carpets or heating sources or
elements. NEVER use with damaged cords or
plugs.
GENERAL SAFETY PRECAUTIONS
11. INTENDED FOR UPRIGHT, FREESTANDING
USE ONLY. Do not install in cabinet or enclosed
spaces.
12. DO NOT operate with missing or broken parts.
13. This product is intended for INDOOR USE ONLY.
DO NOT USE OUTDOORS.
14. Only qualified repair personnel should perform
griller service. Service or maintenance
performed by unqualified personnel could result
in injury.
15. Do not operate this roller in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
16. DO NOT tamper with or modify the controls.
17. KEEP UPRIGHT when transporting. DO NOT
UPEND OR TURN UPSIDE DOWN.
Copyright 2010 DTX International
3
SPECIFICATIONS
Model Rollers Temp Power Voltage Dimensions
5 110V 1KW
o 0-250 C
Big Dawg
Top Dawg
Mad Dawg
7
9
o 0-250 C
o 0-250 C
1.4KW
1.8KW
22.8” x 10” x 6.7”
22.8” x 13” x 6.7”
22.8” x 16” x 6.7”
STORAGE & TRANSPORTATION
NEVER STORE UPSIDE DOWN.
When storing any hot dog roller, first be sure to
DISCONNECT FROM POWER SUPPLY.
Store away from moisture and flammable materials,
fumes and chemicals.
Cover when stored for long periods to prevent dust
buildup.
When transporting the roller/grill, AVOID EXCESSIVE
VIBRATION.
KEEP UPRIGHT when transporting. DO NOT UPEND OR
TURN UPSIDE DOWN.
110V
110V
Ultra Dawg 11 o 0-250 C 1.8KW 22.8” x 16” x 6.7” 110V
4095 5 o 0-250 C 0.5KW 110V 17.7” x 12” x 7.8”