Great Northern Popcorn 6059 Polar Pal Shaver - Manual (Page 5)

OPERATING PROCEDURES
Please consult the Electrical Specifications section on page 3 of this manual and thoroughly read
the Safety Procedures and warnings on page 2 before operating.
Shaved Ice Production
Congratulations on
TM your Polar Pals
purchase!
You have chosen one of the finest and
most reliable Ice Shaver machines on the
market. We are committed to your
satisfaction.
Should you have questions or comments,
or if you would like to find out about our
other products, please call: 1-800-665-
0728 or find us on the web at
www.greatnorthernpopcorn.com. Check
out our full line of delicious syrups as
well!
We appreciate your business!
1. First, make sure the removable Drip Tray is in place beneath the chute at the front of the
machine.
2. With the machine OFF, open the top lid and load the ice bin with cubed or crushed ice. Do
not overload; make sure the top lid can close and latch.
3. Tilt a cup or cone beneath and in front of the chute. Wrap the flexible plastic catchguard lip
around the base/side of the cup or cone to help direct and collect the maximum amount of
snow/ice.
4. To begin shaving ice, flip the Power switch to the “ON” position. The shaver will begin
producing ice/snow immediately.
Note: The Safety Switch is designed to stop the Motor once the lid’s latch is opened. If, for
any reason, the Motor does not stop, or is able to start when the lid is open, cease production
immediately and consult a qualified repair person.
5. When done with snow cone production, flip the MOTOR switch to the “OFF” position. Use the
top of the chute guard to pack and shape your cone and add liberal amounts of your favorite
syrup. Enjoy!
For Indoor Use Only
Copyright 2012 DTX International All Rights Reserved