HiRO H50083 V92 56K - Manual (Page 14)

14
+PMH - Modem-on-Hold Enable
This command controls the selection of modem-on-hold in the modem. The action of the modem in
response to modem-on-hold events is determined by the state of this command as well as the state
of a negotiated handshake with a V.92-compliant server in V.92 Mode.
Syntax
+PMH=<value>
Defined Values
<value> Decimal number corresponding to the selected operation.
0
Modem-on-hold enabled in V.92 Mode. (Default.)
1 Disabled modem-on-hold.
Result Codes
OK 0 or 1 in V.92 Mode
ERROR Otherwise.
Reporting Current or Selected Value
Command: +PMH?
Response: +PMH: <current value>
Example: +PMH: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +PMH=?
Response: +PMH: (<value> range)
Example: +PMH: (0,1)