HiRO H50083 V92 56K - Manual (Page 15)

15
+PMHT – Modem-on-Hold Timer
This command controls whether or not the modem will grant or deny a modem-on-hold (MOH)
request as well as setting the MOH Timeout value.
Syntax
+PMHT=<value>
Defined Values
<value> Decimal number corresponding to selected setting.
0
Deny V.92 modem-on-hold Request (Default.)
1 Grant MOH with 10 second timeout
2 Grant MOH with 20 second timeout
3 Grant MOH with 30 second timeout
4 Grant MOH with 40 second timeout
5 Grant MOH with 1 minute timeout
6 Grant MOH with 2 minute timeout
7 Grant MOH with 3 minute timeout
8 Grant MOH with 4 minute timeout
9 Grant MOH with 6 minute timeout
10 Grant MOH with 8 minute timeout
11 Grant MOH with 12 minute timeout
12 Grant MOH with 16 minute timeout
13 Grant MOH with indefinite timeout
Result Codes
OK 0-13 in V.92 Mode (+MS=V92)
ERROR Otherwise
Reporting Current or Selected Values
Command: +PMHT?
Response: +PMHT: <value>
Example: +PMHT: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +PMHT=?
Response: +PMHT: (<value> range)
Example: +PMHT: (0,1,2,3,4,5,6,7,8,9,10,11,12,13)