HMC Electronics EVO7 Cable Tie Gun, Adjustable Tension User Manual
Page 5
TENSION
Want to select a specifi c level of tie tension for bundling? Simply rotate the tension knob
to any of the easy-to-read, pre-set tension settings. Standard cable tie installation tools
stretch the tie while cutting, causing the tie end to retract into the head, or leave a
protruded edge. But with EVO 7, the tie is cut at precisely the tension you select for a
clean, fl ush cut at the tie head – without overstressing the tie.
LOCK
With TLC Technology, the patent-pending locking mechanism detects when the desired
tension is met, and locks the tie in place prior to cutting. At that moment, all force applied
to the trigger is directed to cutting the tie. That means the trigger only needs to be pulled
far enough to cut the tie, reducing the range of motion and subsequent strain on the hand
and arm.
Once the tie is locked in place, the tool operator needs only to advance the trigger
enough to cut the tie. Since there is no dynamic tension (stretching) on the cable tie, all
energy is focused on driving the blade through the tie, resulting in a clear, fl ush cut, time
after time –
all with no jarring motion to the hand or arm.
CUT
3
LOCK
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440