Humanscale QuickStand - Manual (Page 6)

6
STEP 8
Attaching Crossbar for Dual Monitors
Tools: 3 mm Hex Key
4 mm Hex Key
• Attach Dual Monitor Crossbar to QuickStand unit
using the hardware kit supplied (fig. I)
STEP 9
Attaching Dual Monitors
Tools: #2 Phillips Screwdriver
• Make sure the top of the VESA Plates are facing towards
the top of the monitor before securing
• Screw down the VESA Plates using the hardware kit supplied (fig. J)
• Slide each monitor into the quick-connector on the Dual Monitor Crossbar (fig. K)
• Plug the Power Cord and DVI cable into each monitor
I
J
K