Step 11, Step 10 – Humanscale QuickStand User Manual
Page 7
Advertising
7
STEP 11
Attaching USB Devices
Tools: Flat-Head Screwdriver
•
Using a Flat-Head Screwdriver if needed, remove cable cover by tilting out from the bottom (fig. M)
•
Route USB cables from keyboard and mouse into cable bracket (fig. N)
•
Carefully pull cable slack through bracket until cable heads are set within. Wrap remaining cable slack around bracket (fig. O)
•
Replace cable bracket cover (fig. P)
STEP 10
Secure Palm Support
•
Peel off sticker backing from Palm Support and place down
in your desired position on the front edge of the Platform (fig. L)
L
M
N
P
O
Advertising