HYDAC CS 1000 - Manual (Page 44)

ContaminationSensor CS1000 Overview of menu structure
HYDAC Filtertechnik GmbH en Page 44 / 100
BeWa CS1000 3247149n en 2009-02-04.doc 2009-02-04
Switching output (SWtOUT)
Mode „1“ (M1)
No settings necessary (NO SET)
Mode 2 (M2)
Switching point (SP1)
Measuring channel (MEAsCH)
NAS Maximum (NAsMAX)
NAS (NAS)
ISO-class 2µm (ISO 2)
ISO-class 5µm (ISO 5)
ISO-class 15µm (ISO 15)
ISO Code (ISO)
Temperature (TEMP)
NAS-class 2 (NAS 2)
NAS-class 5 (NAS 5)
NAS-class 15 (NAS 15)
NAS-class 25 (NAS 25)
Switching function (SwFNCT)
Beyond limit (BEYOND)
Below limit (BELOW)
Within band (WITHIN)
Outside band (OUTSDE)
No switch (OFF)
Limits (LIMITS)
Lower limit (LOWER)
Mode „3“ (M3) Upper limit (RSTART)
Measuring channel (MEAsCH)
Target cleanliness (TARGET) ISO (ISO)
Mode „4“ (M4) NAS (NAS)
Measuring channel (MEAsCH)
Target cleanliness (TARGET) ISO (ISO)
Upper limit (RSTART) NAS (NAS)
Test cycle time (CYCLE)
Mode „Single“ (SINGLE) Set value (60)
Analog output (ANaOUT)
NAS Maximum (NAsMAX)
NAS (NAS)
NAS + Temperature (NAS+T)
Temperature (TEMP)
HDA+ISO (HDaISO)
HDA+SAE / HDA+NAS (HDaSAE HDaNAS)
ISO-class 2µm (ISO 2)
ISO-class 5µm (ISO 5)
ISO-class 15µm (ISO 15)
ISO Code (ISO)
ISO Code + Temperature (ISO+T)
NAS-class 2 (NAS 2)
NAS-class 5 (NAS 5)
NAS-class 15 (NAS 15)
NAS-class 25 (NAS 25)
Restart measurement, discard changes (CANCEL)
Restart measurement, save changes (SAVE)