HYDAC CMWIN - Manual (Page 16)

CMWIN ENGLISH Page 16
Edition 06/2007
• To zoom in on one of the grid squares, click on it and hold the left mouse button down.
You can select one or more grid squares by dragging the mouse and drawing a rectangle
around them. The selected portion is indicated by a thicker broken line.
• Release the left mouse button to zoom in on the selected portion, i.e. the selected portion
is displayed larger within the overall graph.
3.5.5 Zoom Out
• Click on the “Graph“ dialogue box and select “Tools“ in the dropdown menu and
“Zoom out“ in the submenu, or select “Zoom out“ at the bottom of the screen.
• “Zoom out“ is now highlighted at the bottom of the screen.
• When you move the mouse over the graph the mouse pointer turns into a magnifying
glass with a minus sign.
• Zooming out functions in a similar manner to zooming in. Select one or more grid squares
by dragging the mouse and drawing a rectangle around them.
• Release the left mouse button to display the view last shown in the overall graph in the
framed area.
3.5.6 Panning
• Click on the “Graph“ dialogue and select “Tools“ in the dropdown menu and “Pan“ in
the submenu, or select “Pan“ at the bottom of the screen.
• “Pan“ is now highlighted at the bottom of the screen.
• When you move the mouse over the graph the mouse pointer turns into a hand.
• Click on the graph and keep the left mouse button depressed.
• Using the mouse now shift the image in the required direction.
• Release the mouse button.
• Panning is only done in whole grid units.
3.5.7 Full view
• Click on the “Graph“ dialog and select “Full view“ in the dropdown menu, or select
“Full view“ at the bottom of the screen.
• The graph now shows the entire time and amplitude range of the measurement.
3.5.8 Automatic scale
• Click on the “Graph“ dialogue box and select “Automatic scale“ in the dropdown
menu, or select “Automatic“ at the bottom of the screen.
• The scale settings selected (see section 3.5.9) are applied to the current recording.