Hydro-Logic StealthRO100 - Manual (Page 17)

Component Specifications
(cont.)
52 0HPEUDQH
VWHDOWK52 100 ™ TF Membrane Elements are recognized as one of the
industry’s most reliable and highest performing membrane elements that
deliver consistent performance and quality. Advanced membrane technol-
ogy and manufacturing processes allow these elements to deliver consis-
tent results.
t 96% – 99% PPM Rejection
t Improved System Performance
t Superior Quality and Cost Savings
t Individually Tested and Sanitized
t Made in the U.S.A.
52 0HPEUDQH 2SHUDWLQJ /LPLWV 9HU\ ,PSRUWDQW
t MEMBRANE TYPE: Thin Film Composite
t MAXIMUM OPER ATING TEMPERATURE: 113°F (45°C)
t MAXIMUM OPER ATING PRESSURE: 100 PSI
t MAXIMUM FEED FLOW RATE: 2 GPM
t PH RANGE, CONTINUOUS OPERATION: 2 - 11
t MAXIMUM FEED WATER TURBIDITY: 1 NTU
t MAXIMUM FEED SILT DENSITY INDEX (SDI): 5 SDI
t CHLORINE TOLERANCE: 0 PPM

t DOW flat sheet material
t CHLORAMINE TOLERANCE: 0 PPM
t MANGANESE TOLERANCE: 0 PPM
t MAXIMUM TDS: <1000 PPM
t IRON TOLERANCE: <1 PPM
t SILICA TOLERANCE: <10 PPM
t MAXIMUM HARDNESS: <10 Grains Per Gallon (170 PPM)
NOTE: Operating your membrane outside of the parameters
voids the warranty.