iCreation speeCup user vanual - Manual (Page 10)

The standby time of speeCup is 336 Hours, you had
better not to slide the switch to OFF position if it is
unnecessary.
4 9
OPERATION
Turning speeCup On or Off
The ON/OFF switch is located and clearly marked on the
bottom of the speeCup.
To use speeCup with any Bluetooth enabled smartphone or
tablet, you must first pair the device to the speeCup. Once
paired they will always automatically connect to speeCup
when the power is turned to the ON position and Bluetooth is
enabled on your device.
Turn the Bluetooth feature of the iPhone to ON. It will then
begin searching for any Bluetooth device within range.
You will see speeCup on the Devices list. Touch the
to pair, and you will see that it's .
Make sure the speeCup is turned to the ON position, then
press and hold the smartControl for about 3 seconds until
the orange and blue LED flash alternately.
speeCup Connected
1.
2.
3.
Connecting with iPhone
Pairing speeCup with Smartphone or Any
Bluetooth Enabled Music Device
speeCup can also be connected to other audio devices like
your car audio system, home audio system or sound bar
using the 3.5mm audio out cord provided.
Music from the Bluetooth connected device will play on
the audio system connected to speeCup.
Any use of a mobile device for phone calls or voice
commands will pause the music and speeCup will
function normally as a hands free interface to the
Bluetooth connected mobile device.
Whenever your smartphone is in the phone dialing
screen mode speeCup presumes you are using the
smartphone for voice communication and music could
remain on pause even after the call has ended. To
resume playing music, close the phone dial screen on
the smartphone.
AUDIO OUT