iCreation speeCup user vanual - Manual (Page 3)

2
ADJUSTING VOLUME
To adjust speeCup’s volume, rotate the smartControl
clockwise to increase the volume or counter-clockwise to
decrease it.
Volume can be adjusted by either the smartControl or
the Bluetooth device speeCup is connected to.
LOW BATTERY INDICATION
Apple iOS battery indication: FULL LOW
Other Bluetooth device: may be no indication
By default the sound indication on speeCup is switched off. To
switch it on, press and hold
until a confirmation tone occurs.
After that, 3 beeps occur every 5 minutes at approximately 10%
battery power remaining. Press and hold
again to switch it off.
11
CHARGING
speeCup has a built-in Li-ion battery (3.7V, 1.6A), so it can be
used without connecting to a power supply. To charge the
battery, follow these steps:
Connect the micro USB connector to the speeCup DC 5V
input.
Plug the USB full-size connector into the 12V accessory car
plug supplied.
A common USB type AC charger (DC 5V, 500mA) can be
used as well.
speeCup can be charged by plugging the USB connector
into a computer.
1.
3.
2.
4.
When speeCup is charging the LED status indicator will
be RED. When fully charged the RED status indicator
LED will go off.
From fully discharged battery to full charge will take
several hours.
A fully charged speeCup will last for up to 20 hours of use.