Chapter 3: basic functions, Charging tone, Making a call – iCreation G-700 user vanual User Manual
to display the main menu items.
Press to choose , then press
to choose "
" to activate this
feature or choose "
" to deactivate it, and then press
Every time you place the handset on the base, a tone occurs.
This tone confirms that the handset is charging. You can switch
For normal use, we recommend that you leave the charging
tone enabled. This makes the phone easier to use and
avoids the risk
improper placement in the chargi
, the handset would not charge and it might go
Chapter 3: Basic Functions
Making a Call
When you dial, up to 25 digits appear on the screen. If the
number is longer than 16 digits, the digits become smaller to
accommodate the whole number.
You can place your calls in two ways:
Pick up the handset and press
to engage the line. You
hear a dial tone, and appears.
Dial a telephone number. The number appears on the screen.
When you hear your called party, speak with a normal voice.
To end the call, press or place the handset on the base.
Enter a telephone number. Press and hold
to insert a
pause if necessary. Check the number on the display.
If you make a mistake, correct it by using
When the number correctly appears, press
to dial it out
through a landline.
Or press to dial through your
For more details please refer to
Note: The DECT phone must first be connected to the
This procedure is more convenient and reliable,
can check the number as you enter it