iCreation G-700 user vanual - Manual (Page 48)

47
Connecting
Connect the plug of the power supply to the power jack of the base,
and then plug the power supply into a standard AC wall outlet.
Connect one end of the phone line cord to the phone line jack on the
base, and then connect the other end to a standard phone wall outlet. 2
1
Installing the Batteries
Rechargeable Ni-MH batteries (AAA size, 1.2V, 800mAh) come with your
phone. Install the batteries before use.
Slide the battery cover in the direction of the arrow, and then pull
it out.
Insert new batteries as indicated, matching correct polarity (+,-).
To replace the battery cover, sliding the cover up until it snaps
into place.
2
1
3
14
To phone wall
outlet
To AC wall outlet
Press to display the main menu items.
Press to choose , then press .
The handset prompts you to enter the current base PIN code
(the default PIN is
). Use the numeric keys to enter the
code and press .
Press or to choose , then press
.
Enter the new four-digit PIN, and press .
Enter the new PIN code again to confirm it, then press
to save the setting.
Menu
Select
1590
OK
Up Down Change PIN
Select
OK
OK
beneath
beneath
beneath
beneath
beneath
beneath
1
2
3
4
5
6
Base PIN
Base